电镀废水处理设备
本款机器是我厂根据客户实际反馈设计定制的设备，简单方便，无忧售后。
产品规格
生产能力：499.89 KBkg/h
电机功率：KW
催化转速：r/min
电压：V
定制详情：
设备尺寸：
全国咨询电话
400-875-8755
催化燃烧设备
RTO
粉尘治理设备
脱硫脱销
废水处理设备
所有产品
电镀废水处理设备
本款机器是我厂根据客户实际反馈设计定制的设备，简单方便，无忧售后。
产品规格
生产能力：499.89 KBkg/h
电机功率：KW
催化转速：r/min
电压：V
定制详情：
设备尺寸：
正品行货
售后维修
无忧退换货
： 产品订购流程
1.产品咨询
拨打热线电话或在线咨询提供需求
2.客服接待
客服人员为您提供解决方案
3.确定方案并付款
方案确定完毕支付款项
4.发货配送
设备打包发货，进行配送安装
工艺特点 Technics Characteristic
电镀废水中的主要污染物质均为各种金属离子，常见的有铬、铜、镍、铅、铝、金、银、镉、铁等，其实是酸类和碱类物质，如硫酸，盐酸，硝酸，磷酸和氢氧化钠，碳酸钠等到，有些电镀液还使用了颜料等到其它物质，这些物质大部分是有机物，另外，在镀件基材的预处理过程中漂洗下来的汕脂，油污，氧化铁皮，尘土也被带进了电镀废水中。
①同传统的处理工艺相比较，最新的电镀废水处理方案大大减少了酸碱溶液的使用量，不但降低了系统的成本投入，且利于环保。②该工艺的产水水质标准相对较高，能够达到工业软化水标准，因而回收的产水可以用于一些生产中的辅助用水。③采用了膜组件作为工艺的核心处理环节，整体工艺设计合理，具有非常高的可靠性能，使得系统的运行效率大大提高。④废水可以直接进入膜分离设备，无需添加药剂降低了系统的运行成本，且简化了操作步骤，便于管理。
The main pollutants in electroplating wastewater are metal ions, such as chromium, copper, nickel, lead, aluminum, gold, silver,cadmium, iron and so on. They are acids and bases, such as sulfuric acid, hydrochloric acid and nitric acid. Phosphoric acid andsodium hydroxide, sodium carbonate wait, some electroplating solutions also use pigments to wait for other substances, thesesubstances are mostly organic matter, in addition, in the pretreatment process of the base material washed off Shantou grease,oil. lron oxide and dust are also brought into electroplating wastewater.
Compared with the traditional treatment process, the latest electroplating wastewater treatment scheme has greatly reduced theuse of acid-base solution, not only reduced the cost of the system. The water quality standard of this process is relatively highand can reach the standard of industrial softened water. Therefore, the recycled water can be used in some auxiliary water inproduction.3. The membrane module is used as the core of the process. The overall process design is reasonable and has avery high reliability. The operation efficiency of the system is greatly improved. 4 wastewater can be directly entered into themembrane separation equipment. The operation cost of the system is reduced without adding medicament, and the operationsteps are simplfied. The convenient management of 5.
①同传统的处理工艺相比较，最新的电镀废水处理方案大大减少了酸碱溶液的使用量，不但降低了系统的成本投入，且利于环保。②该工艺的产水水质标准相对较高，能够达到工业软化水标准，因而回收的产水可以用于一些生产中的辅助用水。③采用了膜组件作为工艺的核心处理环节，整体工艺设计合理，具有非常高的可靠性能，使得系统的运行效率大大提高。④废水可以直接进入膜分离设备，无需添加药剂降低了系统的运行成本，且简化了操作步骤，便于管理。
The main pollutants in electroplating wastewater are metal ions, such as chromium, copper, nickel, lead, aluminum, gold, silver,cadmium, iron and so on. They are acids and bases, such as sulfuric acid, hydrochloric acid and nitric acid. Phosphoric acid andsodium hydroxide, sodium carbonate wait, some electroplating solutions also use pigments to wait for other substances, thesesubstances are mostly organic matter, in addition, in the pretreatment process of the base material washed off Shantou grease,oil. lron oxide and dust are also brought into electroplating wastewater.
Compared with the traditional treatment process, the latest electroplating wastewater treatment scheme has greatly reduced theuse of acid-base solution, not only reduced the cost of the system. The water quality standard of this process is relatively highand can reach the standard of industrial softened water. Therefore, the recycled water can be used in some auxiliary water inproduction.3. The membrane module is used as the core of the process. The overall process design is reasonable and has avery high reliability. The operation efficiency of the system is greatly improved. 4 wastewater can be directly entered into themembrane separation equipment. The operation cost of the system is reduced without adding medicament, and the operationsteps are simplfied. The convenient management of 5.