喷涂废水处理设备
本款机器是我厂根据客户实际反馈设计定制的设备，简单方便，无忧售后。
产品规格
生产能力：64.05 KBkg/h
电机功率：KW
催化转速：r/min
电压：V
定制详情：
设备尺寸：
全国咨询电话
400-875-8755
催化燃烧设备
RTO
粉尘治理设备
脱硫脱销
废水处理设备
所有产品
喷涂废水处理设备
本款机器是我厂根据客户实际反馈设计定制的设备，简单方便，无忧售后。
产品规格
生产能力：64.05 KBkg/h
电机功率：KW
催化转速：r/min
电压：V
定制详情：
设备尺寸：
正品行货
售后维修
无忧退换货
： 产品订购流程
1.产品咨询
拨打热线电话或在线咨询提供需求
2.客服接待
客服人员为您提供解决方案
3.确定方案并付款
方案确定完毕支付款项
4.发货配送
设备打包发货，进行配送安装
工艺特点 Technics Characteristic
喷涂废水主要来自于预脱脂、脱脂、表调、磷化、钝化等车身前处理工序;阴极电泳工序和中涂、喷面漆工序，汽车涂装废水中含有树脂、表面活性剂、重金属离子、颜料等污染物，特别是其中的电泳废水、喷漆废水成份复杂，浓度高，可生化性差。喷涂废水处理主要采用分质处理、混凝沉淀、混凝气浮、砂滤等工艺对喷涂废水进行处理。
喷涂废水处理的特征:①喷涂废水处理种类多，水质因使用的材料而异，仅脱脂液就有多种配方、涂料种类则更多。②排放无规律，除部分水洗水连续溢流排放外，喷涂线废水或废液多为间歇集中排放。③水质水量变化大，无规律可循。
喷涂废水处理方法: (1)物理处理法。有分离法、过滤法、离心分离法等。(2)化学处理法。有中和法、凝聚法、氧化还原法等。
Spray wastewater mainly comes from pre-degreasing, degreasing, surface adjustment, phosphating, passivation and otherpre-treatment procedures. Cathode electrophoretic process and middle coating process, painting process, automotive paintingwastewater contains resin, surfactant, heavy metal ions, pigments and other pollutants, especially electrophoretic wastewater,paint wastewater composition is complex. High concentration and poor biodegradability. Spraying wastewater treatment ismainly divided into quality, coagulation precipitation, coagulation air floatation. Spraying wastewater is treated by sand filtrationprocess. The characteristics of spray wastewater treatment are as follows: there are many kinds of spray wastewater treatment,and the water quality varies with the materials used. There are many formulations in degreasing solution alone, and even morein paint types. Except for the continuous overflow discharge of some washing water, spraying line wastewater or waste liquidmostly changed greatly by intermittent concentrated discharge of 3. 3 water quality and water quantity, which can be followedirregularly.
Spraying wastewater treatment method: 1) physical treatment. There are separation method, filtration method, centrifugalseparation method and chemical treatment method. There are neutralization method, coagulation method, redox method and soon.
喷涂废水主要来自于预脱脂、脱脂、表调、磷化、钝化等车身前处理工序;阴极电泳工序和中涂、喷面漆工序，汽车涂装废水中含有树脂、表面活性剂、重金属离子、颜料等污染物，特别是其中的电泳废水、喷漆废水成份复杂，浓度高，可生化性差。喷涂废水处理主要采用分质处理、混凝沉淀、混凝气浮、砂滤等工艺对喷涂废水进行处理。
喷涂废水处理的特征:①喷涂废水处理种类多，水质因使用的材料而异，仅脱脂液就有多种配方、涂料种类则更多。②排放无规律，除部分水洗水连续溢流排放外，喷涂线废水或废液多为间歇集中排放。③水质水量变化大，无规律可循。
喷涂废水处理方法: (1)物理处理法。有分离法、过滤法、离心分离法等。(2)化学处理法。有中和法、凝聚法、氧化还原法等。
Spray wastewater mainly comes from pre-degreasing, degreasing, surface adjustment, phosphating, passivation and otherpre-treatment procedures. Cathode electrophoretic process and middle coating process, painting process, automotive paintingwastewater contains resin, surfactant, heavy metal ions, pigments and other pollutants, especially electrophoretic wastewater,paint wastewater composition is complex. High concentration and poor biodegradability. Spraying wastewater treatment ismainly divided into quality, coagulation precipitation, coagulation air floatation. Spraying wastewater is treated by sand filtrationprocess. The characteristics of spray wastewater treatment are as follows: there are many kinds of spray wastewater treatment,and the water quality varies with the materials used. There are many formulations in degreasing solution alone, and even morein paint types. Except for the continuous overflow discharge of some washing water, spraying line wastewater or waste liquidmostly changed greatly by intermittent concentrated discharge of 3. 3 water quality and water quantity, which can be followedirregularly.
Spraying wastewater treatment method: 1) physical treatment. There are separation method, filtration method, centrifugalseparation method and chemical treatment method. There are neutralization method, coagulation method, redox method and soon.